On/Off-Grid CIM-1200E/T  
 
  Overview   |   Technical Data
 
     
 
  • On-Grid or Off-Grid Mode
  • Specially Designed to Provide Backup Power when the Grid is Down
  • Four DC Input Channels for Solar or Battery Input
  • Over Discharge Protection for 48V Lead-Acid Batteries
  • Pure Sinewave AC Output
  • MPPT for Each Solar Panel
  • Outdoor or Indoor Mounting
  • Made in U.S.A
 
     
  Each CyboInverter (CIM-1200E/T) can connect to four solar, battery, or wind DC sources and produce 1250W, 230V, 50Hz AC to the grid when grid is on, or 230V AC to an off-grid circuit to run AC loads.  
     
 
 
  When the grid is on, the inverter works like a regular on-grid inverter that meets UL1741 and IEEE1547 standards including: over and under voltage shutdown; over and under frequency shutdown; and anti-islanding.

When the grid is down, the inverter will shutdown immediately and then send a test signal from its off-grid output port to check the status of the connected off-grid AC circuit. If there is no AC present and an AC load is detected, it will generate AC to power the load.

In the off-grid mode, when the inverter detects the grid is back on, it will stop powering the load. After a 5-minute UL mandatory wait, the inverter will send AC power to the grid again.

The drawing shows 2 on-grid and 1 on/off-grid CyboInverters daisy-chained as a group.
 
     
     
 
4 Channel 1.25KW On/Off-Grid CyboInverter for Solar & Battery
Part No: CIM-1200E/T    Maximum CyboInverters per 20A Branch Circuit: 3-4
 
     
 
 
 
 
 
 

© 2024 CyboEnergy, Inc.
Home | Contact Us